Search results for " Aluminium"
showing 10 items of 42 documents
Non-conventional Ce:YAG nanostructures via urea complexes
2019
AbstractCe:YAG nanostructures (Ce:YAG = Cerium in Yttrium Aluminium Garnet), easy to control and shape, have been prepared via templating approach using natural and synthetic materials (i.e. paper, cotton wool and glass wool) previously soaked with a gel-like metals precursor and then thermally treated to achieve the wished morphology. The final material, otherwise difficult to process, can be easily moulded, it is lightweight, portable and forms, at the nanoscale, homogeneous layers of interconnected but not agglomerated nanoparticles (15 ± 5 nm). Using the same synthetic route, called Urea-Glass-Route, but in absence of a template, extremely pure Ce:YAG nanoparticle (45 ± 5 nm) can be als…
Sheet Bending Modelling for AA 5083 Aluminium Alloy
1995
An extensive investigation of the V- and U-die bending processes of AA 5083 aluminium alloy has been performed by means of the finite element method and the experimental tests. The predicted results, in terms of elastic springback and loads, were compared with the experimental ones in similar conditions. At a given punch stroke, the springback ratio K increases with the sheet thickness, and, at a constant sheet thickness, K increases with the punch stroke. The comparison between predicted and experimental K values shows an excellent agreement in all the ranges of punch stroke and sheet thickness investigated. A very good agreement between the predicted bending forces and the experimental on…
Influence of initial treatments of aluminium on the morphological features of electrochemically formed alumina membranes
2003
Abstract The fabrication of alumina membranes by electrochemical oxidation of annealed aluminium was investigated. Porous layers were grown in 0.4 M H3PO4 at −1 and 5 °C at different anodising times. The morphology of the outer surface was found to be dependent on temperature and charge density, with both determining the extent of chemical dissolution of the anodic oxide. The inner-surface morphology was found to depend on the applied voltage only. The chemical dissolution rate of anodic oxide grown on annealed aluminium was found to be lower than that formed on unannealed aluminium under otherwise identical conditions. Such a difference in behaviour is explained in terms of a higher finish…
Defects in yttrium aluminium perovskite and garnet crystals: atomistic study
2000
Native and impurity point defects in both yttrium aluminium perovskite (YAP) and garnet (YAG) crystals are studied in the framework of the pair-potential approximation coupled with the shell model description of the lattice ions. The calculated formation energies for native defects suggest that the antisite disorder is preferred over the Frenkel and Schottky-like disorder in both YAP and YAG. The calculated values of the distortion caused by the antisite YAl x in the lattice turn out to be in an excellent agreement with the EXAFS measurements. In non-stoichiometric compounds, the calculated reaction energies indicate that excess Y2 O3 or Al2 O3 is most likely to be accommodated by the forma…
Co-precipitation synthesis of Nd:YAG nano-powders: the effect of Nd dopant addition with thermal treatment
2007
Nanopowders of Yttrium Aluminium Garnet doped with neodymium ions were obtained by the co-precipitation method from the reaction of aluminium, yttrium and neodymium nitrate with ammonia. The amount of neodymium was selected in order to produce samples of nominal stoichiometry NdXY (3-X)Al5O12 (where X = 0.006, 0.012, 0.024, 0.048, 0.081, 0.096, 0.17, 0.19, 0.38, 0.54, and 0.72, respectively). After washing and drying, the hydroxide precursors were subjected to Thermo-Gravimetry and Differential Thermal Analysis experiments from room temperature up to 1500 °C, which showed the presence of exothermal events accompanying phase transformation phenomena. X-ray diffraction investigations conducte…
Development of processes, qualification, and de-risking for the Ariel primary mirror
2022
The work carried out in the Ph.D. program focused on developing the optics design of the Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (Ariel) telescope, an optical/infrared mission of the European Space Agency (ESA), whose primary mirror is an off-axis paraboloid mirror measuring 1.2 · 0.7m. The novelty of the telescope is that both the mirrors and the telescope structure will be made of aluminium, and the primary mirror will be made of bare aluminium without a thick hard coating. The choice is mainly due to the thermo-mechanical properties of the material, and the usage of the same material for the whole structure will allow better heat exchange between the mirror and the opt…
Properties Augmentation of Cast Hypereutectic Al–Si Alloy Through Friction Stir Processing
2022
AbstractThe present endeavour is to augment mechanical attributes via friction stir processing (FSP) in hypereutectic aluminium–silicon castings by the means of microstructural modifications and defects reduction. Wherein, the study proceeds with mainly two approaches namely, alteration in tool revolution (TR) and the number of FSP passes. The prepared specimens were evaluated investigating volume fraction of porosities, microstructural characterizations and microhardness. Therefrom, the specimen with highest number of passes delivered most uniform properties resulting from the reduction in casting porosities and refined silicon particle uniform distribution throughout friction stir process…
Coprecipitation synthesis of Nd:YAG nanopowders II: the effect of Nd dopant addition the on Luminescence Properties
2009
Abstract Nanopowders of Yttrium Aluminium Garnet (Y3Al5O12, YAG) doped with neodymium (Nd:YAG, 0.2–24.0 at.%) were prepared using the co-precipitation method followed by an annealing treatment up to 950 °C. For a concentration of neodymium lower than 3.2 at.% the materials were found constituted by the garnet phase according to X-ray diffraction investigations. However, at higher neodymium loading the hexagonal and monoclinic forms of yttrium aluminium oxides were found together with the garnet phase. For Nd quantity lower than 0.8% the luminescence emission spectra appear to be nearly the same, indicating that in the examined range of composition the immediate surrounding of the emitting N…
Evaluation of 2,3-epoxypropyl groups and functionalization yield in glycidyl methacrylate monoliths using gas chromatography
2014
Abstract Poly(glycidyl methacrylate- co -ethylene dimethacrylate) (poly(GMA- co -EDMA)) is most frequently used as parent monolith to obtain stationary phases with a variety of surface chemistries for liquid chromatography and capillary electrochromatography. Functionalization is performed by opening the accessible 2,3-epoxypropyl groups of the monolith with a suitable reagent. The number of 2,3-epoxypropyl groups which are accessible before and after the functionalization reaction, and the grafting yield, are important parameters, required both to optimize functionalization and to interpret the chromatographic performance of functionalized monoliths. In this work, a method capable of provi…
Innovative user defined density profile approach to fsw of aluminium foam
2007
Metallic foams are one of the most exciting materials in the world of mechanical industry due to their reduced mass and the good mechanical, thermal and acoustic characteristics. Consequently, their application, is increasing day by day even with the important drawbacks that reduce their suitability and diffusion such as high manufacturing cost and difficulty in processing. An innovative approach is outlined in this paper that enables the production of complex shapes taking advantage of deformation processing and friction stir welding (FSW). The aim is to create customized tailored manufactured parts. The cellular construction of foams makes this approach rather challenging as the cell wall…